Thread: Labview CMUcam demo problem
View Single Post
  #4   Spotlight this post!  
Unread 15-01-2006, 20:44
CmptrGk's Avatar
CmptrGk CmptrGk is offline
Programming Mentor
AKA: Dillon
FRC #0716 (Who'sCTEKS)
Team Role: College Student
  
Join Date: Jan 2004
Rookie Year: 2004
Location: Kent,CT
Posts: 212
CmptrGk has much to be proud ofCmptrGk has much to be proud ofCmptrGk has much to be proud ofCmptrGk has much to be proud ofCmptrGk has much to be proud ofCmptrGk has much to be proud ofCmptrGk has much to be proud ofCmptrGk has much to be proud of
Re: Labview CMUcam demo problem
Quote:
Originally Posted by Windward
Currently, I'm trying to get labview to work with the CMU camera. The camera is powered and our serial plug is plugged in, yet when I set the com to comport4 and press run, it does not run. I am not sure what the problem could be. I am not sure what the program demo itself is supposed to do, but I get an error stating there was a problem connecting. The error states that the error could be because of lack of power or a serial connection problem.

But I am pretty sure there is power and it is connected properly.

FYI, we are using a USB to serial converter, which works with the robot controller.

Any advice?
i had a similar problem, in device settings i changed the port that the converter "was" to com1 and it worked. at least for me the gui wont see anthing above com3
__________________
#14


"Great autonomous mode Dillon."," It hasn't been written yet"
after an Archimedes match
Reply With Quote