Quote:
|
Originally Posted by PhilBot
I'm running the latest CMUCam2 application (downloaded yesterday) and I'm getting strange behavior.
The app sees the target and can track it... sort-of.
It correctly tracks left-right, but it seems to be getting the up/down reversed ... It actively avoids the target in the vertical direction.
It seems to me that if I rotated the camera then the up/down would be OK and the left-right would be reversed.
The Camera image appears upside down (rotated 180) in the preview and tracking windows. I've check the assembly instruction and everything checks out OK.
Any ideas why I have the vertical reversal? 
Phil |
Phil,
The power switch should be at the top. If it's not, then the camera is upside down. As for the reversed tracking, there are two jumpers on the camera for reversing the horizontal and vertical tracking directions. Try putting a junper on the vertical one.
Good luck!
-Joe