|
Re: grrr need help with my cmu cam
Quote:
|
Originally Posted by billbo911
Let's see. It's a holiday (MLK day). There was only 10 minutes between your first post and you third. Your question is quite vague, and has very little detail. There are already dozens of posts related to CMU camera issues that, my guess is, you haven't searched through yet. So, here is a couple suggestions.
1) Be much more descriptive.
2) SEARCH first.
3) Be patient.
Users on CD love to help. They will point you in the right direction to look for your answer, but may not give you the answer directly. That way, you learn way more in the process.
Patients Grasshopper.
|
Patience is even more helpful 
Other than that I agree, searching, being more descriptive and patient are all good.
I'm inclined to say this is LabVIEW, and if so, check your connection, the servos tend to throw them all off, also, make sure you're not connected to the Robot Controller with the TTL adapter (that little circuit with a female PWM connector that goes on the four pins on the side of the RC) The camera can only utilize one of its two serial ports at a time.
__________________
Matt Krass
If I suggest something to try and fix a problem, and you don't understand what I mean, please PM me!
I'm a FIRST relic of sorts, I remember when we used PBASIC and we got CH Flightsticks in the KoP. In my day we didn't have motorized carts, we pushed our robots uphill, both ways! (Houston 2003!)
|