|
Re: Labview CMUcam demo problem
Quote:
|
Originally Posted by Windward
Ok, we installed NI-VISA, and our port shows up in Measurement and Automation Explorer. We are still getting the same error.
|
Have you configured your baud rate for the COM port to 115200? That's a step I most often forget. Double-click on the COM port in MAX and then switch to the middle tab at the bottom of the screen (Device Settings I think) and set the Baud Rate to 115200.
-Danny
__________________
Danny Diaz
Former Lead Technical Mentor, FRC 418
|