View Single Post
  #23   Spotlight this post!  
Unread 17-01-2006, 01:07
Joe Hershberger Joe Hershberger is offline
National Instruments
AKA: jhersh
FRC #2468 (Appreciate)
Team Role: Mentor
 
Join Date: Nov 2005
Rookie Year: 1997
Location: Austin, TX
Posts: 148
Joe Hershberger is a name known to allJoe Hershberger is a name known to allJoe Hershberger is a name known to allJoe Hershberger is a name known to allJoe Hershberger is a name known to allJoe Hershberger is a name known to all
Re: Labview problems and code problems

Quote:
Originally Posted by double_check
We are getting an error message that reads "The application is closing because of a reported error. You should confirm that the correct serial port has been selected. You should confirm that the camera has power and is connected to the PC via serial cable." Does anyone have any idea how to fix it? We have the CMUCam 2 demo up and the GUI file among others. We have NI-VISA is loaded so that is not our problem. Help, please.
If you get that message, then an error cluster popped up on the upper right side of the screen. Please post what that error is... Both the error number and the message. Most often it's because you didn't pick the correct serial port from the dropdown box on the upper left. The other notes in the error message apply as well. What have you tried / verified?

Good luck!
-Joe