Thread: CmuCam problem
View Single Post
  #14   Spotlight this post!  
Unread 19-01-2006, 15:19
Zoom's Avatar
Zoom Zoom is offline
Lost User
AKA: Umair Nasir
FRC #0369 (Nuts & Volts)
Team Role: Programmer
  
Join Date: Sep 2005
Rookie Year: 2003
Location: Brooklyn
Posts: 22
Zoom is an unknown quantity at this point
Send a message via MSN to Zoom
Re: CmuCam problem
Servos are hooked up to pwm01 & 02? YES
Camera power is connected by PWM cable to an empty RC PWM output? YES
PWM cable is attached to the camera serial port and the RC via TTL converter? YES
Backup battery is connected to the RC and fully charged? YES
12v battery is hooked up to the RC and fully charged? YES
OI is tethered or linked by radio to the RC and powered?YES
Green power LED on the camera power is on? YES
Can you call up Kevin's tracking and camera menus? YES
Did you test separately with Labview?YES

everything is fine. But the servos dont move. even if you try to move them through the menu.
__________________
A Program isnt finished until the Programmer dies...