Thread: EasyC Default Code
View Single Post
  #6   Spotlight this post!  
Unread 19-01-2006, 21:50
BrianBSL BrianBSL is offline
Registered User
FRC #0190
  
Join Date: Sep 2004
Rookie Year: 2000
Location: Worcester, MA
Posts: 251
BrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud of
Re: EasyC Default Code
I would take a guess that it would work, but the units would be incorrect. The kit gyro has an output sensitivity of 12.5mV per degree, you will have to compare this to whatever gyro you are using, and scale it correctly.

For refrence, an Analog Devices ADXRS300 has an output of 5mV per degree. This means that you need to edit: multiply (not divide) the number you get from easyC by 2.5 (12.5 mV / 5 mV) in order to get real degrees.

Brad would know for sure, but I think that is how it works.
__________________
My posts represent my personal views only, and do not represent the views of either my team, Team 190, nor its primary sponsor, Worcester Polytechnic Institute.
Last edited by BrianBSL : 19-01-2006 at 23:59.