Thread: Separate Processor & Robot Rules
View Single Post
  #1   Spotlight this post!  
Unread 20-01-2006, 12:33
JoeXIII'007's Avatar
JoeXIII'007 JoeXIII'007 is offline
Pragmatic Strategy, I try...
AKA: Joeseph Smith
FRC #0066
Team Role: Alumni
  
Join Date: Feb 2004
Rookie Year: 2001
Location: Ypsilanti, MI (Ann Arbor's shadow)
Posts: 753
JoeXIII'007 has a reputation beyond reputeJoeXIII'007 has a reputation beyond reputeJoeXIII'007 has a reputation beyond reputeJoeXIII'007 has a reputation beyond reputeJoeXIII'007 has a reputation beyond reputeJoeXIII'007 has a reputation beyond reputeJoeXIII'007 has a reputation beyond reputeJoeXIII'007 has a reputation beyond reputeJoeXIII'007 has a reputation beyond reputeJoeXIII'007 has a reputation beyond reputeJoeXIII'007 has a reputation beyond repute
Send a message via AIM to JoeXIII'007
Separate Processor & Robot Rules
Just a curiousity:

Can we use a separate processor (IE: BASIC STAMP) to control the CIM Camera and Camera Servos without violating the rules as long as the I/O is sent to the controller?

Also, is the CIM Camera considered a custom circuit board that can control the pan & tilt servos? If so, can a custom circuit board control only the pan and tilt servos of the camera?

Sorry if any of this was confusing.

-Joe
__________________
Joeseph P. Smith
jpthesmithe.com
University of Michigan - Informatics (B. Sci. 2012)
General Purpose Programmer - Cooperative Institute for Limnology and Ecosystems Research (CILER) at NOAA-GLERL