Thread: CMUcam default code not responding
View Single Post
  #26   Spotlight this post!  
Unread 23-01-2006, 14:18
Validius's Avatar
Validius Validius is offline
There is a shadow following me.....
AKA: Mark Ratering
FRC #1549 (Washtenuts)
Team Role: College Student
  
Join Date: Feb 2005
Rookie Year: 2005
Location: South Lyon
Posts: 159
Validius will become famous soon enoughValidius will become famous soon enough
Send a message via AIM to Validius
Re: CMUcam default code not responding
Quote:
Originally Posted by Kyveck
I ran the serial port diagnostic tests. In loopback mode, terminal input was not echoed. When connected to the camera, there was no responce. I am confident that I configured everything per the ReadMe file.

When I ran debug, the following was printed to the terminal:
Camera: Initialized abnormally with code 131
Camera: Initialization state = 1
Camera: Initialization state = 2
Camera: Initialization state = 3

I hope to test the TTL to RS232 board soon using the ifi instructions.
Thank you for your help.
Kyle W
Has anyone responded to this? I'm getting the same error code.
__________________
When a sociaty comes to believe that human life is not inherently worth living, it is a slippery slope to the gas chamber. You wind up on a low road that twists past Columbine and leads toward Auschwitz.

-Peggy Noonan