Quote:
|
Originally Posted by Danny Diaz
Just curious, when you have this problem are you using a USB-to-Serial converter or a built-in serial port? We've been up and down this problem trying to reproduce it, and we're having a bugger doing anything close to what you're describing - we're using a built-in port on a desktop, though.
-Danny
|
I have this problem with a built-in serial port on a laptop. I run the camera from a 7.2 v battery and monitor the battery voltage; the voltage does not change during operation. If the current draw were too high, the voltage would drop. 7 v should be OK, since the camera has a 5 v regulator on board.
For details, see
http://www.chiefdelphi.com/forums/sh...ad.php?t=42631