Thread: CMUCam2 GUI Tilt Question
View Single Post
  #4   Spotlight this post!  
Unread 27-01-2006, 02:01
Joe Hershberger Joe Hershberger is offline
National Instruments
AKA: jhersh
FRC #2468 (Appreciate)
Team Role: Mentor
  
Join Date: Nov 2005
Rookie Year: 1997
Location: Austin, TX
Posts: 148
Joe Hershberger is a name known to allJoe Hershberger is a name known to allJoe Hershberger is a name known to allJoe Hershberger is a name known to allJoe Hershberger is a name known to allJoe Hershberger is a name known to all
Re: CMUCam2 GUI Tilt Question
Quote:
Originally Posted by Idaman323
I tried the updated version and it gives me an error when I hit the run button. Ir says I think ERROR: 7. Im not sure what it was, because Im not at that computer right now

And now, apparently, the camera board, was mounted on upside down.. Someone else put it together wrong. So I fixed that and now the servos turn away from the object. It sees it then moves the opposite direction. The tilt still doesn't work though. I set the setting on the CMUCam2 GUI to "Invert Tracking" and in the Color tab, when I start trackeing, the whole box turns blue and the camera doesn't move at all. Im getting confused Hopefully when I hook it up to the robot it all works.
Let me know what the error is for sure when you are at the computer again.

Thanks
-Joe