Thread: [Help] OI Modification
View Single Post
  #3   Spotlight this post!  
Unread 29-01-2006, 11:49
BrianBSL BrianBSL is offline
Registered User
FRC #0190
  
Join Date: Sep 2004
Rookie Year: 2000
Location: Worcester, MA
Posts: 251
BrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud ofBrianBSL has much to be proud of
Re: [Help] OI Modification
Quote:
Originally Posted by roboticsguy1988
now would replacing the green LEDs with blue ones be against the rules. My guesss is so.

Also on average what does a blue LED draw? Basically how many Blue LEDs could you use before you reach 10ma?
You decide how much current to give them, based on the resistor size you use in series with it. But at 10mA, you are not going to get more than 1 LED unless you use a larger resistor and thus have the LED be less bright. Some "bright" LED's produce their rated intensity at a forward current of 20mA or more, sometimes even in the hundreds of mA for very bright LED's (although this is extremely rare).
__________________
My posts represent my personal views only, and do not represent the views of either my team, Team 190, nor its primary sponsor, Worcester Polytechnic Institute.