[et1337]

So we set up a timer to trigger an interrupt every time it overflows. However, I could not get OpenTimer1(), ReadTimer1(), etc. to work, so we had to manually set up the timer.

My question is, how do I get the timer to overflow faster? Right now it overflows 3 or 4 times per loop.

Timer setup code:

T1CONbits.T1CKPS0 = 1; // 1:8 Prescale (clock=1.25MHz/each tick=800ns)
T1CONbits.T1CKPS1 = 1;

T1CONbits.TMR1CS = 0; // = 0 Timer uses internal clock
TMR1H = 0x85; // Sets most significant byte
TMR1L = 0xED; // Sets least significant byte
T1CONbits.TMR1ON = 1; // Turns on Timer1
IPR1bits.TMR1IP = 0; // Sets Timer1 as low priority
PIE1bits.TMR1IE = 1; // Enables Timer1 overflow interrupt
INTCONbits.GIEL = 1; // Enables low priority interruptions