Quote:
|
Originally Posted by Joe Johnson
Latest update from Ed at Banebots concerning stock of pinions and pullers. FYI.
Also, teams with experience with these gearbox: Please share the the Good, the Bad and the Ugly with us. We are all learning.
Joe J.
|
The screws holding the gearboxes together were very tight on one of our boxes. Tight enough that when the kids used a slightly ill-sized phillips driver, they stripped the heads pretty quickly and we had to drill them out. For those that are curious, they are 3M metric screws, and I believe about 28mm long on the 1:16 and 1:25 gearboxes.