Quote:
|
Originally Posted by TECHMAGE
Some body  PLEASE helps us we're trying to find the a wiring diagram or something to see how we can wire the little yellow banner optical sensors to our robot so if anyone has anything on it please get back to us at earthsuad5@aol.com or auron06@gmail.com. |
On the banner sensors, there should be four wires: blue, brown, white, and black.
Brown wire is positive source, <EDIT> between 10V and 30V </EDIT>
Blue wire is ground
Black and white wires are the signal wires
When using the black wire as your signal pin, your default value is normally closed (0 when unblocked). If using the white wire as your signal, it is normally open (1 when unblocked).
Hope this helps,