Quote:
|
Originally Posted by jgannon
There is a pressure release valve in the kit that you are supposed to attach to your compressor. It is set to overflow at 125PSI. If you don't have this piece installed, you really need to do so, or you risk damaging your equipment and yourself.
|
Joe the pressure relief valve is already attached to the compressor when you recieve it. It is not precise and will pop off between 125 and 135 PSI but a compressor needs to have an electrical cutoff in case the mechanical relief doesn't operate. Hence my query about bringing the device in it's current configuration, to competition. Safety captains be watchful.