Hey, i don't know if this is the right spot for this so if it is feel free to move it. but heres my delima. i'm operating off of a linux system (Ubuntu 5.04 Hoary Hedgehog) and i downloaded BrickOS-0.9.0 and all of the stuff it needs (gcc-h8300-hms-2.95.2.2.1) and i was able to download the firmware using
Code:
$ firmdl3 /usr/local/lib/brickos/brickOS.srec
but then i try to use dll and it doesn't work, so heres everything that i typed and the result from dll in verbose mode
Code:
$ cd /programs/BrickOS/brickos-0.9.0/demo
$ make
$ dll -v helloworld.lx
C.P. Chan & Tyler Akins - USB IR Tower Mode for Linux.
opening tty...
LNP Initialized...
loader hostaddr=0x00 hostmask=0xf0 portmask=0x00
delete
#time 2939359759 00 try 0: ack:0
try 1: ack:0
try 2: ack:0
try 3: ack:0
try 4: ack:0
error deleting program
when i do this the light turns on on the IR tower but i don't see anything happening on the RCX. and i was able to download the firmware so i know that it isn't a hardware problem
i've looked all over the forums and haven't found my answer, so i decided to post one. i would greatly appriciate your input.