|
Re: BrickOS problems
It has been a year since I have worked with BrickOS so I don't know the exact details. You may want to check the flags you can set on the dll program there may be some options there which can help. I noticed you already use the -v flag which is helpful. Another flag I remember helping us was the speed or rate of transer. Sometimes the baud rate you are running at could cause a problem if you are running too fast for your tower.
Another issue I barely remember has something to do with BrickOS and when you install it if the options are slightly wrong you won't be able to communicate with it through the tower. I hope this information helps.
-Nick
|