Quote:
|
Originally Posted by ghhs_1527
well the switches we have are on-off-on switches and we need 3 of them then an on-off-on momentary then just 2 on-off switches. And on the pinout sheet it shows that p3-aux 1 is relay fwd and p3-aux 2 is relay rev, so how can i connect all my switches to the ports when all there is is just 2 relay fwd and 2 relay rev to each port?
|
Ok, just to make sure that I understand. You need to hook up a total of 5 switches? 3 center-off and 2 two-position?
You can get 2 of the center-off switches hooked up to port 3, the other on off hooked up to port 4, and the two on-off switches onto the two pins left on port 4.
Code:
Port 3
on-off-on
| | |
pin pin pin
2 4 7
trig top
on-off-on
| | |
pin pin pin
10 12 14
aux1 aux2
Code:
Port 4
on-off-on
| | |
pin pin pin
2 4 7
trig top
on-off
| |
pin pin
10 12
aux1
on-off
| |
pin pin
14 12
aux2
Hope this helps,