|
Re: How Can I aim at the Vision Target Faster but without overshooting?
Quote:
|
Originally Posted by phrontist
You shouldn't do that. You should calibrate the victors. See IFI documentation.
|
Been there. Done that. All four Victors used for the drive system had identical outputs after calibration, and their zero value was 132. I can't speak for every Victor in the world, but our gyro autonomous code and our manual PID program both drive straight now.
Just my opinion. Professional driver on closed course. Do not try this at home. Read the manual. Your mileage may vary.
__________________
Exothermic Robotics Club, Venturing Crew 2036
VRC 10A, 10B, 10D, 10Q, 10V, 10X, 10Z, and 575
|