Sorry, I didn't even think of it at the time.
To calculate mass properties in Pro/E Wildfire 2.0
Edit > Setup... > Mass Props
Enter the density of the material which can be obtained from
www.matweb.com or "Machinery's Handbook".
Then go to Analysis > Model Analysis
The default should be model mass properties. Click compute and it will give you the mass provided you have assigned density to all the components in the assembly otherwise it will ask you for there densities at this time. It will also show you the center of gravity (CG) which is very important in preventing tipping.
__________________
2011 Championship Finalists/Archimedes Division Championships w/ 2016 & 781
2010 Championship Winners/Newton Division Champions
Thank-you 294 & 67
2009 Newton Division Champions w/ 1507 & 121
2008 Archimedes Division Champions w/ 1124 & 1024
2007 Championship Winners/Newton Division Champions w/190, 987 & 177 The Wall of Maroon
2006 Galileo Division Champions w/ 1126 & 201
www.bobcatrobotics.org
"If you can't do it with brains, it won't be done with hours." - Clarence "Kelly" Johnson