Quote:
|
Originally Posted by Fruity Pebbles
I remember sitting there at UCF(Florida) with my cousin saying "it looks like their hopper is gonna fall off" I guess it was gonna happen sooner or later.
What caused it to fall off?
|
Our turret/scoring section is bolted to a ring that rides on four bearings this is turned by belt using a window motor.
On friday morning our team decided to run a defensive autonomous mode to stop a robot from dumping balls into the lower
goal. When the robot was put down it was misaligned just enough to hit the far wall of the ramp. This gave the robot a
large jolt (much more than the robot ever got even in the finals when it blocked two robts in autonomous) and the scoring
section fell off. The team jumped into action without missing a match we fixed the robot by adding four bearings which
made the ring ride on eight and made it much more stable. This was actually in the plans after the UCF regional, but the
team never had time to do it until this opportunity for improvement came up. The robot was then re-inspected and passed.
The fact of this competition is that sometimes robots break. Unfortunately ours did, however we were able to fix it never
missing a match which is very hard for some teams to accomplish.
Our robot NEVER missed a match ALWAYS took the ramp, and NEVER fell over. We as a team are very pleased on how are robot
performed at both the UCF and Boilermaker regionals, we now are looking forward to a great event at the Palmetto
Regional.
We would like to wish everyone the best of luck during the rest of the season.