|
Re: FRC/VEX Challenge
Quote:
|
Originally Posted by Donut
That's a good shooter there. What kind of gearing are you currently using for it?
|
I have the motor shaft driving a 60 tooth gear, which drives a 12 tooth gear on the same shaft as the 48 tooth chain sprocket, which drives the 10 tooth sprocket on each wheel. So that would be 5/1 * 4.8/1 = 24/1. Sad thing is I just put stuff together and hoped it worked. As you can see in the first picture, I shredded one of the servo gears on the first attempt...
Kev
__________________
Team 71: 1999, 2000 (Driver), 2001-2002 (Driver, Animator) // Team 1064: 2003 (Co-founder, Coach), 2004 (Coach) // Team 1714: 2006-2007 (Mentor, Coach) Team 1675: 2005-2007 (Mentor, Coach), 2008 (Mentor), 2009-2017 (Mentor, Coach) FLL: '04 (Judge), '05 (Ref), '06 (Ref), '07 (Ref), '08 (Judge, Ref), '09 (Judge), '10 (Ref), '16 (Judge Advisor) // Ref: '05 (IN, IRI), '06 (IN, IRI), '07 (IN, IRI), '08 (WMR, Curie)
WI RPC: 2006 - 2016 // FRC Inspector: '07 (WI), '08 (WI, IL), '09 (WI, IL), '10 (WI, CMP), '11 (WI, IL, CMP), '12 (WI), '13 (Northern Lights) 2007 WI Woodie Flowers Award Finalist // 2011 Wisconsin Regional Outstanding Volunteer // 2011/2013 Midwest Regional Chairman's Award
|