Quote:
|
Originally Posted by Andy Baker
Very, very nice transmission. The compact design is fabulous. The reversed direction pneumatic cylinder is a nice twist to save space. I do have some questions:
1. What made you switch from bushings to bearings?
2. Why use collar clamps on the CIM shafts as opposed to steel shaft clips (like the ones used on the Kit Transmission)?
3. Are the CIM gears pressed onto the CIM shafts?
This is definitely another outstanding design coming from the Tigertrons.
Way to go!!
Andy B.
|
1. We switched from bushings to bearings for a couple reasons. The first reason was simply to increase efficiency. The second reason is because bearings worked out very well for our input cluster. Bushings were a simple and cost effective method for 2005, but were not the best way to do things on a high RPM gear cluster.
2&3. The gears on our CIM motors are not stem pinions. We had planned on stem pinions and using another bearing in the plate opposite the CIM motors, but decided we could save some weight and headaches by switching to a regular gear. the reason we have collars on the CIM gears is to 'pinch' the gear onto the shaft. We did this mainly because our team doesn't have any metric broaches and we didn't want to modify the CIM shaft. We have used this design previously in 2004 and it worked very well for us.
Thanks all for the kind compliments! Transmissions like this only happen when enthusiastic STUDENTS get involved in the design and build and constantly push the team to do better! Thanks Henry and Bunney you guys put in alot of time convincing the team we needed a dual motor drive and even more time machining your wishes.

__________________
"Engineering is making the impossible happen"
"We are here to create, not merely survive" - unknown fortune cookie
"If you don't push the envelope you're just spinning your wheels"