|
Re: 222's TigerDrive
Quote:
|
Originally Posted by sanddrag
I thought somebody told me once that you were running 20 pitch 11 tooth pinions on the CIM motors and the reason for those clamping collars is that you cannot fit a keyway because the "wall thickness" between the root diameter and the bore diameter is so thin. I might be dreaming though. I can't remember.
|
yup you are correct I just looked at the measurements last night.
__________________
"Engineering is making the impossible happen"
"We are here to create, not merely survive" - unknown fortune cookie 
"If you don't push the envelope you're just spinning your wheels"
|