Quote:
|
Originally Posted by Steve0100
Very nice design!
I've added sensors and have devised a scheme (still in the process of Implementation ) to have the robot detect walls and "bounce" off them before hitting with an angle of reflection equal to that of the angle of incidence. I'd like to put it inside a boxed-in area and have it bounce around like an billiard ball for robotics demos.
|
Thanks.
I really like how clean your assembly looks!
On sensors.... from my experience with the the Vex Ultrasonics.
They do a good job of sensing objects directly in front as long as object has a surface that is perpendicular to the sensor. In other words, when approaching a wall at an angle, the sensor wont pick it up very well at all.
Additionally, if you do put your bot in a box, the walls will bounce the 40KHz signal pulses quite a bit, causing misreadings from the controller.
Here's a thought. Try using the light sensors from the Line Following kit. With a little experimentation, you should be able to fine tune an algorithm to detect the relative distance from the wall based on the amount of light being reflected off of it. The biggest problem you will face with that is consistent light levels, and that may render this option useless. (Remember the difficulties with the CMU cam. and reflected light in 2005?)
