|
Re: Vex start up code run PWM outputs without Rx
Quote:
|
Originally Posted by intellec7
With the default startup code (the MPLAB project available at http://www.vexlabs.com/vex-robotics-downloads.shtml)
The PWM outputs are not updated when the Reciever unit is not plugged in/transmitter is off. If in Process_Data_From_Local_IO I try to set pwm01=255, nothing happens. I tried to call Process_Data_From_Master_uP(); every loop but that did not help. I would like to use my robot autonomously without having to have the transmitter on or the reciever plugged in.
Thanks. |
2 comments:
1) Search before posting.
2) This question comes up often.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|