View Single Post
  #19   Spotlight this post!  
Unread 05-05-2006, 04:10
John Gutmann John Gutmann is offline
I'm right here
AKA: sparksandtabs
FRC #0340 (GRR)
Team Role: Mechanical
 
Join Date: Feb 2005
Rookie Year: 2004
Location: rochester
Posts: 804
John Gutmann has a brilliant futureJohn Gutmann has a brilliant futureJohn Gutmann has a brilliant futureJohn Gutmann has a brilliant futureJohn Gutmann has a brilliant futureJohn Gutmann has a brilliant futureJohn Gutmann has a brilliant futureJohn Gutmann has a brilliant futureJohn Gutmann has a brilliant futureJohn Gutmann has a brilliant futureJohn Gutmann has a brilliant future
Send a message via AIM to John Gutmann Send a message via MSN to John Gutmann Send a message via Yahoo to John Gutmann
Re: New Speed Controllers :)

Quote:
Originally Posted by Tom Bottiglieri
By the way, you would be much better off using thick stranded wire than one solid piece of wire. Current flows on the surface of a conductor, so the amount of current a single piece of wire can transmit is limited by its size.
By the way I know that, it was sarcasm because to run 120A through 1 wire you would need 0 gauge wire. which is about 1/2" in daiamter.

I can't even Imagine trying to run wires like that to a motor.

Besides you can really draw more current then the wire already on the motor will allow(if any), like the CIMs with out modifying it. Or if there is no wire you would have to go by cantact area, and the other motors dont have a big contact area.