|
Re: pic: My Physics II Robot
Quote:
|
Originally Posted by miketwalker
What was the budget for each machine, and what did you guys use to control them?
|
The budget was $300 for all materials. We spent probably half of that on what was on the version of our robot that you see in the picture. We had few design iterations. We controlled ours through a tether with the drill handles as the controls. To operate the arm, we connected the Fisher Price motor to a 7.2v drill handle and battery.
Two of the robots were completely radio control, using cheap, hobby controllers. Even though the controllers where cheap, that didn't leave much room in their budget for much else.
__________________
2003-2006: FRC Team 67 - Drafter, Driver, Student Leader
2006 Volunteering: Kettering Kickoff Ref, Team Ford FIRST Robotics Invitational Ref
2007 Volunteering: GLR Field Reset/Repair; WMR Robot Inspector and Scorekeeper; MARC Referee
2008 Volunteering: WMR Planning Committee, WMR Scorekeeper, MARC Ref, IRI Scorekeeping, WMRI Scorekeeping & DJ
2009 Volunteering: Kettering District, MARC, IRI, and WMRI Scorekeeper/Field Power Controller
2010 Volunteering: Kettering District, MARC, IRI, and WMRI Scorekeeper/Field Power Controller
2011 Volunteering: Waterford District, West Michigan District, MARC, & IRI DJ
2012 Volunteering: Waterford District, West Michigan District DJ
|