[kiettyyyy]

Originally Posted by Kevin Sevcik

Hmm. Do you know if it's the red wire that's not working or is it the white wire that's not working? That is, make the white wire IO = 1, and the other = 0 and see if it still works in that direction. If it doesn't then your wiring might be faulty somewhere. If it works in that direction but not the other, then your wiring of the red wire might be bad.

OOPPS! I forgot in the EDU.. you have to specify the port to become an input or output.. that IO stuff.. not that rc_dig_out...

It works fine now!!

Thank you for all your help!