Quote:
|
Originally Posted by Astronouth7303
If you just need the camera to look around, you can also hook up the servos to the camera, and have it point itself. Then you can use any computer (or controller) with a serial port to give it commands. The entire communication protocol is documented.
|
I plan on running the camera off the EDU controller as well as the servos, in the same setup that was used by most team this year in FRC. Once I finish modifying the TTL chip to work with the EDU controller i will be able to start. The main purpose of this project is to track multiple colors as well as have a demo robot... Anyone have any other ideas for sensors or other interesting things i could do? I was thinking maybe putting a range finder sensor mounted right underneath the camera pan/tilt base...