|
Re: Vex Transmitter problem
Quote:
|
Originally Posted by TheOtherGuy
I have got one heck of a strange problem with my Vex transmitter. I programmed a holonomic drive vex robot to use one joystick (channels 1 and 2) to drive it, and for some reason, it switches channel 2 with channel 3 and vice versa. In other words, you have to use the left joystick for moving forward when you should be using channel 2.
I have another transmitter at my house that came with another kit, and when I switched the crystals and used the other transmitter, channel 2 worked just as it should. I went through the first transmitter and set all the configurations to match those on the second, but it still doesn't seem to work. Any help?
|
Without seeing your code I'll have to take a SWAG. It sounds like the transmitter is in 23 mode. Try switching it to 12 mode.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|