|
Re: pic: Single Op CNC'd wheel
Quote:
|
Originally Posted by 114ManualLabor
In the past for the wheel, we've had the spokes in the center of the wheel, which makes it a two op process: machine out one side, flip, and machine out the other. For this wheel, one side gets machined out, and it's done.
(as far as the two op wheel, here 's an example.)
[edit] I'm realzing now that people are talking about the spokes not coming to exact center on the wheel axel. So as for that reason, I've seen many wheels that don't (vex...), and they've held up quite well. So as far as that's concerned, it's all style. [/edit] |
I see. You've moved the spoke back to be flush with one wall of the wheel. I was taking the prior questions about asymmetry to be not about moving the spokes back, but about how they don't intersect the center of the wheel.
__________________
--Madison--
...down at the Ozdust!
Like a grand and miraculous spaceship, our planet has sailed through the universe of time. And for a brief moment, we have been among its many passengers.
|