|
Re: PWM Frequency
Quote:
|
Originally Posted by Guy_E
All the settings were the same as if I were downloading the program using the orange cable (accept the different COM port).
As far as I know, there is no button to push in the VEX controller.
And my serial port is located on COM 1.
|
Guy,
When you used the orange USB to RJ11 cable to program the VEX controller, you have to press the button on the cable to do it...
When the orange cable is taken apart at its DB9 connector, the program button is between the DB9 and the RJ11 connectors.
Also, insure that COM1 is set to 115K baud in the Device Manager so that it agrees with the IFI loader.
Mike
__________________
Mike Betts
Alumnus, Team 3518, Panthrobots, 2011
Alumnus, Team 177, Bobcat Robotics, 1995 - 2010
LRI, Connecticut Regional, 2007-2010
LRI, WPI Regional, 2009 - 2010
RI, South Florida Regional, 2012 - 2013
As easy as 355/113...
|