[Josh Murphy]

The wire is connected to the fuse block. The blue goes to the ground block, green plugs into the red wire off of the compressor, black goes into black off of the compressor, and the wires off of the accumalator tank run into the white wire either one works and the other one goes to the positive fuse box. Did you check the pressure gauge so that it is set at 60psi and that it is closed? if it is set there then you may have routed the tubing wrong and it is circulating through the system and it is not building up the pressure, I did that my first time this year and realized it and fixed it so check where you have routed the tubing. I read the pnuematics section in the how to section of the rules book and figured it out in about an hour so try that. good luck and if there is any problem PM me with any questions.