Thread: [OCCRA]: Problem with the compressor, pressure switch, or Bosch relay.
View Single Post
  #3   Spotlight this post!  
Unread 16-10-2006, 14:45
BrittanyV BrittanyV is offline
Registered User
FRC #1025 (Impi Robotics)
Team Role: Alumni
  
Join Date: Jan 2005
Rookie Year: 2005
Location: Royal Oak, MI
Posts: 28
BrittanyV is on a distinguished road
Re: [OCCRA]: Problem with the compressor, pressure switch, or Bosch relay.
I've hooked up all the wires correctly- that much I'm pretty sure about. I'm not positive the tubing is hooked up correctly, but as far as I can tell, it is. Just to make sure, here's what we have hooked up to what:

The compressor goes to the one way valve which goes to a Y splitter. One end of the split goes to the accumulator tank and the other end goes to the pressure gauge, (which is set at 60 psi) pressure relief valve (or whatever that's called) and the valves and pistons. The pressure switch is screwed into the other end of the accumulator tank.

After reading the manual, that's what I think is correct. If I'm wrong, please tell me!

Thanks,
Brittany
__________________
I have a higher and grander standard of principle than George Washington. He could not lie; I can, but I won't. -Mark Twain
Reply With Quote