[Cory]

Raw materials:

1"x1" aluminum angle
3/8" shaft (keyed?)
1/2" shaft (keyed?)

Power transmission:
1/2" shaft collars
3/8" shaft collars
1/8" keystock
3/32" keystock
2mm keystock

Tools:
2mm keyway broach
ratcheting box wrench set
Tap set
Vise grip pliers
channel lock pliers
needlenose pliers
wire cutters
wire strippers
wire crimpers
socket set
calipers and/or micrometer
tape measures
square
deadblow hammer
automatic center punch
transfer punch set
c-clamps
chain breaker

Robot parts: (may have to wait until after kickoff for some of these, so as to not buy illegal parts)
CIM motors
Batteries
10 AWG wire
12 AWG wire
6 AWG wire
PWM cables (or appropriate materials to make your own)
Wire terminals
Anderson battery connectors
Battery charger(s)
#25 chain
#35 chain