Quote:
Originally Posted by PhilBot
2) The camera board had a connector on one edge, but no way to firmly mount the board to the carrier. So if the bot got bumped, the camera could move and wreck your shooter allignment. We resorted to a spacer and hot glue.
|
Ah yes indeed. We put a piece of plastic dowel between the camera board and the main board, then screwed the camera board into the dowel. There are little tiny holes at the edges of the camera board that we used, but it was rather difficult finding screws that small.
With a redesigned pan-tilt housing from IFI, the CMUCam2+ looks like a much better alternative.