|
Re: Drawings
I spent all weekend looking at them...they aren't very straightforward. And I can't find some things at all. (The bungee cord assembly, for example.)
Best thing to do is first print them out on big paper then start at the highest-level assemblies and trace the part numbers backwards through the fabrication sheets until you get to the raw material (sometimes 3+ steps).
__________________
MIT Mechanical Engineering
>> College Mentor, Team 97: Cambridge Rindge and Latin School with The Edgerton Center, MIT Mechanical Engineering, Bluefin Robotics, and Draper Laboratory
>> Alumnus, Team 527: Plainedge HS
|