Quote:
Originally Posted by Richard
I expect the inpsection checklist will have a line item corresponding to <R12>. The test will probably be to place the arm or extension so that it is at its maximum reach, then verify that the robot still fits within the 72" wide x 72" deep limit. Of course, passing this test will not ensure that an arm is legal. Safety is always the paramount concern, and <R03> clearly says that an otherwise-legal device on a robot can be disallowed if, in the judgement of the inpsectors or referees, it poses a hazard.
|
I would surmise as much, but I'm going to ask the question anyways. I've seen enough official interpretations counter to my instincts that I feel safer just checking.