|
Can't get TTL port on new camera to work
We are developing code on an EDUbot while our team builds up the base of the robot. We had code from last year that works great with last year's camera. We use TTL to TTL port communications for this prototype. When we replaced the camera with this years model it doesn;t work. It searches but never finds the light. All the information in the T-packet is zero. I checked for the obvious like baud rate. I assume with no jumpers its 115200 baud. I get the impression from the assmbley drawing (the only docs IFI provided this year for the new camera) that the TTL port may be disabled.
As mentioned earlier, last years camera works fine on the prototype.
ANy Clues or do we have a bad camera?
PS we are using Kevin Watson's camera code.
BC
|