|
Re: Mounting the ES17-12 sideways orientation
Quote:
Originally Posted by Don Rotolo
Also can be charged in any position
|
Don,
I would not charge a SLA in anything other than the upright position. Even though it is a sealed unit, there exist vents at the top of the battery. Any material (example: acid gel) which plugs the vents will be forced out by the hydrogen gas produced during charging. These vents are designed for gas only. A plugged vent could produce a rather violent rupture when charging.
And if you don't agree with my analysis there is this from the 2007 manual:
Quote:
3.14.3 Pit and Competition Safety
Battery Safety: (Sealed Acid Lead)
Charge in an open, well-ventilated area. Do not charge near an
open flame or near equipment that may produce sparks. Do not
use smoking materials in the battery charging area. Charge in an
upright position. It is not safe to charge the SAL battery in an
inverted position.
|
Regards,
Mike
__________________
Mike Betts
Alumnus, Team 3518, Panthrobots, 2011
Alumnus, Team 177, Bobcat Robotics, 1995 - 2010
LRI, Connecticut Regional, 2007-2010
LRI, WPI Regional, 2009 - 2010
RI, South Florida Regional, 2012 - 2013
As easy as 355/113...
|