I've finally got it all working.
Quote:
Originally Posted by Mark McLeod
Serial port 2 is the one labeled "TTL" (not the tether) and depending on which camera port you connect to it usually requires the tiny TTL-converter chip that came packaged with, but separate from, the camera board.
|
Okay ^_^ that could have prevented a lot of confusion before I fixed it... I had thought the serial mentioned in the code refered to the serial cable port on the camera, so I left it plugged in... until I re-read the FAQ on Kevin's website and took it off...
Quote:
Originally Posted by Mark McLeod
|
I'll get right on that now that the camera works I've got time...
Quote:
Originally Posted by Mark McLeod
Yea, CMUCam issues should be posted in the CMUCam sub-forum, but we'll forgive you.
|
Yeah, my first post on this forum...
Anyways, my primary problem, aside from leaving the serial cable plugged in was that I never included terminal.c and terminal.h. I re-read the insrtuctions and found no reference to either.
Thanks for your help everyone. ^_^