View Single Post
  #3   Spotlight this post!  
Unread 23-01-2007, 19:26
Justin M. Justin M. is offline
Mechanical/Driver
FRC #0321 (RoboLancers)
Team Role: Mechanical
 
Join Date: Jan 2005
Rookie Year: 2005
Location: Philadelphia, PA
Posts: 310
Justin M. is on a distinguished road
Send a message via AIM to Justin M.
Re: Which pinions for FP motors and BaneBots 42 mm gearboxes?

3.2mm. I just ordered the same stuff today, and was curious to see what size...so I took out the calipers and measured the shafts of the FP motors. They are exactly 1/8", which is 3.175mm, which will fit the gears.

Make sure you get a gear puller if your dont have one already. Then you can re-use the ones on the 550's, or have some spare ones lying around (which wouldn't be a bad idea).
__________________
Team 321: CHS RoboLancers - Drexel University, CHS Alumni Assn., SDP, Philadelphia Motorsports, Lima Corperation