|
Re: Wiring the Compressor
Jake,
Mike (Phalanx) is correct. It is also stated in <R65>:
Quote:
|
The fuse on the Spike relay for the air compressor may be replaced with a 20 Amp Snap-Action circuit breaker.
|
The issue is the inrush current on the Thomas Compressor.
Note that this is the only Spike that can be modified in this manner...
Regards,
Mike
__________________
Mike Betts
Alumnus, Team 3518, Panthrobots, 2011
Alumnus, Team 177, Bobcat Robotics, 1995 - 2010
LRI, Connecticut Regional, 2007-2010
LRI, WPI Regional, 2009 - 2010
RI, South Florida Regional, 2012 - 2013
As easy as 355/113...
|