[normanthefatcat]

hey i dont have a drawing but i know the general config of it...so u have a rail with a cross section that looks like this.... --___-- and you have the power distribution blocks (grey black and red) first a gray one goes on then four reds, then another grey then black ones then final gray


so it looks like...
| G | R | R | R | R | G | B | B | B | B | G |
| G | R | R | R | R | G | B | B | B | B | G |
| G | R | R | R | R | G | B | B | B | B | G |
| G | R | R | R | R | G | B | B | B | B | G |
__________________________________ (<= RAIL)