Thread: CMUCam, Easy C, and Labview
View Single Post
  #19   Spotlight this post!  
Unread 24-01-2007, 14:55
sniggel sniggel is offline
Registered User
FRC #2051
  
Join Date: Jan 2007
Location: A.W. Beattie
Posts: 28
sniggel is an unknown quantity at this point
Re: CMUCam, Easy C, and Labview
our easy c demo 2007 code does not work. are there steps we are missing? Kevin's code works fine. I saw a post about setting the robot to autonomous, but we are using a testbed, not a robot. We do have the servos connedted to pwm 10, 11 so this is not it. Any thing else we need to do?