[Rob]

Hello,

IFI sells a Mini-Bike motor mounting kit that could be pretty easily adapted to mount to the Banebots 12:1 gearbox.

after that all you will need to do is fix the Pinion gear to the mini-bike shaft which isn't bad because it is the same size as on the small CIM (which the banebots box is designed to interface with). I recommend either using loctite to fix the gear on or if you are brave cutting a keyway into the shaft and then using a key along with loctite.

we thought about doing this and got as far as keying the pinion to the sahft before we got scared off for weight reasons.

Good luck!

RAZ