|
Re: Frustrated by McMaster-Carr
Quote:
Originally Posted by Richard
Did you order 6280K371 (same as 6280K117) ? Those finished bore sprockets are available with 1/2" bores, but the description clearly indicates the 1/2" bore variety do not have keyways: "Bores are finished so these sprockets are ready to mount to a shaft. They have standard ANSI keyways located on the centerline of a tooth, except 1/4", 3/8", and 1/2" bore sizes, which do not have keyways.
|
I went back to the McMaster-Carr site to verify. As much as I hate to admit it, I was wrong. Exactly as you said, it IS there in black and white. I missed it. " except 1/4", 3/8", and 1/2" bore sizes, which do not have keyways. "
I stand corrected.
Now, any ideas where, in the Sacramento area, I might be able to get these broached????
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|