Our 2007 Controller was broken so we are using 2006 micro-controller. I downloaded Kevin 2007 Camera code in 2006 controller. I attached Pan - pwm -01 and Tilt - 02. I connected the camera on a TTL and attached it with to a camera with using pwm cable. Than i connect a pwm cable to power camera on pwm pin 3. However, the camera doesn't turn on [No green light]. I take the pwm cable out of pin 3 and put it on analog 1 and the green light turns on
Now the camera shows "Searching" on terminal window. However, the pan and tilt servo's don't move. Can someone please tell me what mistake we might be making.